Batt13
Member
I am planning to install rear protection bars. I am stuck on how to disconnect the electrical plugs. Any info. Is appreciated.
Thanks
Thanks
2022 BMW R18B Saddlebags removal
- Thread starter Batt13
- Start date
widu13
Active member
I've just installed rear bars. I don't know the answer as there is sufficient slack to leave them connected (but supported from the floor).
Batt13
Member
I realize there is slack but it would be much easier to have them removed. May have to leave them attached. Thanks for the help!!!
Star-Lord
Active member
You'll need a thin slotted or flat screw driver 
and insert it into the slot in order to release the electrical connector; I think I showed how to do it in the YT video that I posted for the side cases space panel?
If I did, I'll post the link with the approximate time stamp.
and insert it into the slot in order to release the electrical connector; I think I showed how to do it in the YT video that I posted for the side cases space panel?If I did, I'll post the link with the approximate time stamp.
Star-Lord
Active member
See YT and fast forward 2 min. 45 sec:
See the thin screwdriver
See the thin screwdriver
jgib0626
New member
I've had mine off many times. just cut the zip ties and unplug the wiring harness. You should be able to see how they unplug
Batt13
Member
Thanks Scott
harrisrc740
Active member
Scott to the rescue!!! I was trying to remember, but it just would not come to me 