Search results

I like the clean look and finish of the ROCTANE filler panels on my Model B; best $160, for a nice weekend project on the R18 B/TC.

Maybe they are a Bonneville Oil Cooler Kit; they look like they are still available for sale: Bonneville Performance 6066 Sabal Hammock Circle Port Orange FL 32128 Tel. 310.493.4556 https://share.google/vESxNQR3GhTRDxKIT

Don't quit your day job... unless you're a photographer...!!! 😜

What are we looking at...?

Do you have the ability to raised the front wheel off the ground, where you can spin it freely in order to observe the issue; if so, you'll must likely hear the disc brakes making a rubbing sound - at least that's what my bike still does after 13,000 miles and heavy use of the front the brake...

Not sure if this helps; the below picture, shows the take off BMW OEM parts when I installed the J&H exhaust? Maybe review the V&H exhaust install directions and see if the exhaust support hangers are removed (black parts in the below image) as part of the exhaust install. If I had to bet...

Also, there is a separate thread on this same topic; where the main fuse appeared to cause a voltage sag of sorts: https://www.r18forums.com/threads/spring-strut-adjustment-faulty.2540/

I would probably go with the WILBERS solution for my Model B / TC; you can get the rear strut for under $900 or do your front and rear suspension for $2,200.. It's on my upgrade list when the time comes for my suspension to be serviced; WILBERS has a module which suppresses an error codes from...

Take the "W"...!!!

NOTE: The imagines below are from the R18 B / TC. Hopefully some of this helps; I'm pretty hopeful that you somehow dislodged a connector, while cable mining the previous owner's DC wiring: No. 1 on the image is the fuel pressure sensor: No. 5 - Fuel-Pump Unit | Fuel-Level Sensor...

Any chance you damaged something when you lifted the tank? There is a plastic captive connector; which technically speaking, normally gets disconnected prior to lifting the tank, so as not to stress the plastic fitting on the fuel tank. Folks have cracked the fuel line fitting under the tank...

"was special"..?? IS SPECIAL....!!!

I've always loved the look of Dave's bike..... Good luck with the sale... You'll regret it a week or two after it is sold.. like someone else I know..

They're pretty hollow if you want to mount surface mount LED to each....where the wiring can be run internally down to where the low leg wind fairing mates up closer to the frame of the bike...

No on BT... I work for the City of NY, not Wall St ... The R18 has plenty of HP for my riding style and or skill level..

Package arrived yesterday... Ugh..!!!! The box only included a single directional light; however, priced as a "set"... I might try a different adapter method before I spend another $250...

I think the HEX GS911 is specific to only BMW motorcycles; looking at the website, they have a VIN tool that one can enter in their bike's VIN and check for compatibility... I didn't try entering a different brand VIN into the tool.. I only see the HEX folks referring to BMW throughout their...

I ordered the Mini-LED kit for the R18 Model B | TC from a seller on eBay; parts arrive today, I'm looking to minimize the look of my Model B with a similar look that I used on the Bobber build.. More to follow:

Now we know the price point...