Search results

I'd probably back the tail right into a curb, parking it on my first day out riding...

I'm bothered that this issue is still outstanding... Stupid question... Have you walked around the bike, and checked all of the lights.. directionals.. brake light, etc.. make sure it isn't something silly..

Do these stock photos help?

Below is what I pack in my side cases, where I can stop and throw it on when it starts raining:

I ride the Model B and have been caught in a couple of decent rain storms; I wear a fly fishing jacket made by ORVIS, H/H rain pants over my existing pants and my BMW high top sneakers riding shoes are also waterproof.. I'm bone dry when I shed the rain gear at my destination.. I'd say the...

It looks like the TomTom 550 only requires a two wire setup; opposed to a three wire, which would be 12V constant power, 12V ignition sense and of course the Ground connection. Search the forum for folks who have already wired similar devices to "Switched" power, which is basically a power...

I guess I'm over thinking things... 18,000 miles and I guess the Model B is starting to feel a little lose; however, I find I'm dragging my Floorboards more often these past few weeks.. to the point where I checked the replaceable drag nuts, to see if I needed to replace them..

Hmmm.... Care to elaborate...??

@Boritch https://www.r18forums.com/threads/reconnecting-the-reverse-function.3777/post-51509

The reverse module isn't too bad to remove, but will require some patience and switching through gears in order to remove screws holding covers in place, if you have a heel shifter in place. Maybe remove the Negative ground cable on the battery, before attempting to removing power connections...

Did you use the Reverse prior? I'm surprised it failed, as the control unit appears to be a pretty simple circuit; have you tried removing it and taking a closer look at it?

What sort of mileage have folks logged, prior to servicing the R18 front fork shocks? Are there any particular handling attributes that have degraded, indicating that the front shocks needed to be serviced? Sadly, BMW hasn't published any maintenance intervals for the front fork.

Maybe try reaching out to the BMW shop in Grand Rapids; they had access to a shit ton of R18 accessories, which they are currently selling at a highly discounted price. The person I spoke with on the phone, also has a R18 B and is super familiar with all of the accessories; probably worth a...

Are you looking for a different look or is this proposed change a performance enhancement..? I added the machined RSD Reservoir Covers and the matching RSD levers & mirrors to my Bagger to compliment the black & chrome on the First Edition; the stock reservoirs, never bothered me esthetic or...

How does the dimensions of the carbon fiber piece, line up with the existing engine badge?

It might be easier if forum members mailed you the two upper pieces to be drilled out..??

@Gr8adv - wait a minute.. did you actually drill out all of those holes within the engine cover, or is that an AI generated image..? I actually like the way it looks... I'm not sure about drilling holes in the lower half of the engine case though..

Any luck with the new fuel pump, fully installed within the entire system?

I'm about too.. Culrose went dark on me...

Shaun - I sent you a DM. Scott