I received today the Engine Protection Skid Plate from DK design.
Link
And installed it.
All stainless. The skid itself is painted Grey or black.
No special problem, strait forward job, except one washer was missing.
I had some to replace it.
Please don't comment my dirty and poorly equipped garage ...
The two screws which will receive the backward holder.
They need to be replaced by the two longer ones from the kit.
The two front holders installed in the available unused threaded holes
The back older:
Job done.
Must be noticed that the skid plate has to be removed ( the four underneath screws) for oil and filter change.
Link
And installed it.
All stainless. The skid itself is painted Grey or black.
No special problem, strait forward job, except one washer was missing.
I had some to replace it.
Please don't comment my dirty and poorly equipped garage ...
The two screws which will receive the backward holder.
They need to be replaced by the two longer ones from the kit.
The two front holders installed in the available unused threaded holes
The back older:
Job done.
Must be noticed that the skid plate has to be removed ( the four underneath screws) for oil and filter change.
Last edited: