Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Center punch the surface of the handlebars in order to give the drill bit a purchase point; maybe use a uni-bit or stepper bit and gradually get to the diameter.Glad to be of assistance
I’m struggling with the last part of this install - drilling a hole through the handlebar. Any suggestions, tips or pointers are appreciated. I have basic tools
^ ... what Scott said ... step-bits are great! ... but make sure to de-burr the inside of the hole ... to avoid nasty surprisesCenter punch the surface of the handlebars in order to give the drill bit a purchase point; maybe use a uni-bit or stepper bit and gradually get to the diameter.
I used my pocket knife and etched a cross over the spot. It worked but I should invest in a center punch for the future - thanks YouTube.Center punch the surface of the handlebars in order to give the drill bit a purchase point; maybe use a uni-bit or stepper bit and gradually get to the diameter.
nice Datsun Fairlady...;-)It’s the low. The riding position is a lot more sporty/leaned forward. I’ll attach a picture of how I made the original hydraulic and brake lines work.
Next is going to be the bigger wheels 21” front and 18” rear.
Thank you.nice Datsun Fairlady...;-)